Service & maintenance
Repair, maintenance, and warranty service for cranes and trucks
Request a quote
Features and Options
Features
STANDARD EQUIPMENT - Hoist rated capacity: 60,000 lbs - Main frame: 8” x 4” x 1/2” A500 C tubing - Sub frame: 4” x 2” x 1/4” A500 C tubing - Front stop: 1-1/2” plate - Container lock: Automatic spring loaded - Lift cylinder shaft: 2-1/2” plate - Rear hinge shaft: 3” solid steel - Cable: 7/8” (6 x 37 EXIWRC) - Cable sheaves: 10” O.D. bronze-bushed sheave - Cable anchor: 4 cable clamps - Cable end: Steel casting - Rear hold down: 1” plate located for std. containers - Middle hold down: 3/4” plate - Lift cylinders: 6” x 72” D.A. - Reeving cylinders: 7” x 80” D.A. - Direct mount pump: Gear types 35 gpm @ 1500 rpm - Operating pressure: 1850 psi - Hydraulic valve: 2 spool 45 gpm safety bypass - Hydraulic reservoir: 60 gal. 25 micron filter & screen filter - Outside rollers: 4” O.D. with bronze bearing - Inside rollers: 6” O.D. hardened roller & pins - Working points: Greaseable - Safety stand: Factory installed - I.C.C. Bumper: Folding, mounting lugs factory installed - Rear bumper: Pre-drilled bolt mount - sealed beam backup, clearance and tail lights - Hoist up: 30 sec. approx. - Hoist down: 15 sec. approx. - Cable in: 46 sec. approx - Cable out: 37 sec. approx. - Container length: 18'-22' - Approximate weight: 6100 lbs - Hydraulic valve: 3 spool 45 GPM safety bypass - Cable end: Steel casting, knuckle-type - Rear flange roller: 8” O.D. hardened w/2 1/2” c-1045 - Rear center sheave: 8” O.D. hardenedIncluded Options
• Stellar SI60-174ORR Cable Hoist Assembly-Outside Rail, Reverse Mount Lift Cylinders, 60,000 lb Capacity, Designed to Handle 18"-22' Long Containers • Standard Black Paint • 2 Section Air Controller Pedestal for Use w/ Cable Hoists • 60 Gallon Reservoir and 2 Section Valve Bank Assembly • Direct mount bi-rotational, 7/8" shaft, 13 spline, SAE "B" gear type hydraulic pump • Standard Bumper Assembly for use w/ Folding ICC Bumper • Auto Folding ICC Bumper for Use with Standard Bumper Assembly • Tandem Axle Steel Fender Assemblies with Mounting Brackets. For Stellar Cable Hoist Only • Roll-Rite DC400 Automatic Roll-Off Tarp System with Single- Stage Telescopic Gantry for Tandem Axle Chassis Applications, Up to 24’ Long Containers, Gantry Raises 5’ to 8’, 12V Self-Contained Electric/Hydraulic Power Unit with Wireless Controls for Extend and Retract of the Tarp, Torsion Springs for Arms, Heavy Duty Mesh Tarp.Product Specs
- Location : Kansas City, KS
- Ton-Meters : 0
- Ton Rating: 30
- Type : Cable Hoists
- Engine : Mack MP8
- Horsepower : 455
- Transmission : Allison Automatic 6SP
- Suspension : Hendrickson PRIMAAX Air
Equipment at Kansas City, KS
Stellar
Stellar, located in Garner, Iowa and established in 1990, was the first US corporation to design and manufacture a domestic hydraulic hooklift hoist. Stellar raises productivity with top-of-the-line mechanics trucks that help you get the job done. Since its inception, Stellar has created over 40 different hooklift models featuring single-pivot, double-pivot, and sliding jib designs. Stellar also produces a perfectly upfitted mechanics truck, increasing efficiency, improving organization, and adding convenience to your workday.